DUPONT, Wash., (Reuters) – An Amtrak train derailed yesterday during its inaugural run on a faster route from Seattle to Portland, Oregon, sending passenger cars tumbling from a bridge onto a major highway, killing at least three people and injuring about 100 others.
Thirteen of the train’s 14 cars jumped the tracks near the town of DuPont, Washington State Patrol spokeswoman Brooke Bova said. Officials said 77 passengers and seven crew were aboard.
Five vehicles and two trucks were involved in the accident, and the highway was littered with fragments of the bridge and tree branches. Some motorists were injured but none died, authorities said.
“We have been told there are three casualties at this time,” Bova told a news conference, adding about 100 people were transported to area hospitals. “There are a lot of critical injuries.”
She said all of the train cars have been searched, and emergency efforts would likely extend through the night and into the morning.
Several hours after the 7:34 a.m. (1534 GMT) crash, train cars remained dangling from the overpass, with others strewn across Interstate 5, a major West Coast route stretching from the Canadian to Mexican borders.
“It was just a scene of chaos and piles of twisted metal,” said Ted Danek, administrator for the city of Dupont who visited the site shortly after the derailment.
Some of the people aboard escaped by kicking out windows, passenger Chris Karnes told local news outlet KIRO 7.
“All of a sudden, we felt this rocking and creaking noise, and it felt like we were heading down a hill,” Karnes said. “The next thing we know, we’re being slammed into the front of our seats, windows are breaking, we stop, and there’s water gushing out of the train. People were screaming.”
The derailment occurred on the first day Amtrak trains began using the new inland route between the Washington cities of Tacoma and Olympia, part of a $181 million project to cut travel time, according to an October news release from the state’s transportation department and Amtrak.
The rerouting takes trains along I-5, enabling them to reach speeds of 79 miles per hour (127 km per hour).
Monday’s southbound Seattle-to-Portland train, whose scheduled departure time was 6 a.m. (1400 GMT), was the first to take the new route, which uses tracks owned by a commuter line.
It was not immediately clear whether the derailment was connected to the new route. A National Transportation Safety Board (NTSB) member told reporters it was too early to say what may have caused the crash.
A statement yesterday from the state transportation department said the track had undergone “weeks of inspection and testing” before yesterday.
A train crew member told an emergency dispatcher the train came around a corner before the bridge and then “we went on the ground,” according to an audio recording posted by Broadcastify.com.
Asked whether everyone was OK, the crew member replied, “I am still figuring that out. We got cars everywhere and down onto the highway.”
Amtrak’s co-chief executive, Richard Anderson, declined to speculate on the cause while speaking to reporters on Monday. He confirmed that positive train control (PTC), a system that automatically slows trains if they are going too fast, was not installed on the tracks.
By law, PTC must be installed on all passenger rail systems by 2018, a deadline that has repeatedly been delayed after rail agencies said implementation was more complicated than anticipated. Sound Transit commuter line, which owns the track, reported in September that it did not yet have PTC in operation.
U.S. President Donald Trump said the crash illustrated the need for infrastructure improvements.
The rerouting project was funded by the Federal Railroad Administration (FRA), according to the state transportation department. The work was done by Sound Transit and reviewed by the FRA, the department said on Monday.
The mayor of a town along the new route warned early this month that high-speed trains were dangerously close to cars and pedestrians, according to Seattle’s KOMO News.
The derailment was Amtrak’s second in Washington state this year. On July 2, a southbound train with more than 250 people aboard derailed in the town of Steilacoom, just a few miles north of Monday’s derailment. No serious injuries were reported.
In May 2015, an Amtrak train derailed in Philadelphia, killing eight people and injuring more than 200. The NTSB concluded the driver became distracted by radio transmissions and lost track of where he was.
An Amtrak train traveling from New York in April 2016 hit a backhoe working on railroad tracks in Chester, Pennsylvania, killing two maintenance workers and injuring 41.
That crash prompted criticism from the NTSB about Amtrak’s safety record. Amtrak said last month that it had made numerous reforms.